An inexpensive two-part manual system for forming RSC (Regular Slotted Containers - an industry standard pre-formed flat pack carton.)
Designed to be used with a taping machine and or conveyor.
Your Customer will eventually attach the MacFormer to a taping machine or conveyor. This will stabilise the device.
For demonstration it will need to be stabilised to prevent movement during use. The simplest way is to have someone place their foot on the base of the rear leg.
Set the guide to either right or left handed operation and to half the width of the box plus about 10mm.
Load the videos below to show your customer the MacFormer in use and the correct technique for handling the cartons.
The Magazine Rack is an essential part of the MacFormer's efficiency. A simple and easily learned technique for handling the unformed flat cartons and presenting them to the forming table should be shown to the customer. Show the video below to see the correct technique.
Remember that the MacFormer will be connected to a roller platform which will feed the carton to a taping machine. This means that the formed carton will glide effortlessly off the MacFormer table. In demonstration, those may not be there, so the effect may feel a little clumsy until there's been a bit of practice.
Copyright © 2024 Zecante.com - All Rights Reserved.